Anchor Bolts Can Fix The Air Heat Pump

Here is a brief description of the installation steps of the air heat pump. The first is the foundation production, which can use cement or channel steel, and the foundation must be on the load-bearing beam on the floor. Then it is the adjustment of the placement position. We must ensure that the air heat pump is placed smoothly when installing. A shock-absorbing rubber pad is needed between the unit and the foundation for seismic treatment. The connection of the road system is mainly to connect the pump, valve, filter, etc. between the host and the water tank. After completing the above steps, you need to do a water pressure test. This is mainly to check the pipeline connection to see if there is any water leakage. The fixed anchor bolts must use the anchor bolts of the regular manufacturers. Inferior anchor bolts will greatly reduce the service life of the bolts. Lightweight will cause the bolt threads to loosen and cause the equipment to be damaged. Heavy emphasis will cause the screw part of the anchor bolt to be twisted and deformed. And even breakage caused the equipment to fall directly and be damaged. More serious, casualties occurred.