Products

Overhead lines mainly refer to overhead open lines, which are set up on the ground. They are transmission lines that use insulators to fix transmission wires on poles and towers upright on the ground

Electric Power Stringing is a professional term in the power industry, which refers to the process of installing conductors (usually including high-voltage transmission lines, low-voltage

1. Wire: used to conduct current, transmission of electrical energy components.. 2. Lightning line, protect equipment, avoid lightning strike, is to eliminate lightning protection buildings or

Steel Angle Cross Arm is a commonly used power equipment accessory that can be used in tower structures in power transmission and distribution systems. It is made of high-strength steel and has

Cable Accessories Iron Cross Arm is a support structure for overhead lines, mainly used for power transmission, communication lines, etc. Their main function is to provide a stable support point for

The main function of insulator is to realize electrical insulation and mechanical fixation, for which a variety of electrical and mechanical properties are required.

Hardware Galvanized Pole Top Pin Spindle is a metal component used at the top of a power, communication or lighting pole. This component is hot-dip galvanized to provide additional corrosion

Pin Insulator Spindle is an insulator shaft used in power transmission lines. Its main function is to fix the insulator and wires to ensure that the wires maintain a certain safe distance from the

Insulators used in overhead lines are called line insulators, and insulators used in power stations to support busbars or isolation switches are called station support insulators. Depending on the

Stud, also called double head screw or stud. Fixed link function used to connect machinery, threaded at both ends, middle screw, either thick or thin.

Hot-dip galvanized eye bolts are eye bolts that have been hot-dip galvanized. These bolts are usually made of carbon steel or stainless steel, and the surface treatment is hot-dip galvanizing to

U-Type Bolts are a common fastener that is shaped like the letter U with threads at both ends and an open rectangular or square ring in the middle.