Products

Hardware Galvanized Pole Top Pin Spindle is a metal component used at the top of a power, communication or lighting pole. This component is hot-dip galvanized to provide additional corrosion

Pin Insulator Spindle is an insulator shaft used in power transmission lines. Its main function is to fix the insulator and wires to ensure that the wires maintain a certain safe distance from the

Insulators used in overhead lines are called line insulators, and insulators used in power stations to support busbars or isolation switches are called station support insulators. Depending on the

Stud, also called double head screw or stud. Fixed link function used to connect machinery, threaded at both ends, middle screw, either thick or thin.

Hot-dip galvanized eye bolts are eye bolts that have been hot-dip galvanized. These bolts are usually made of carbon steel or stainless steel, and the surface treatment is hot-dip galvanizing to

U-Type Bolts are a common fastener that is shaped like the letter U with threads at both ends and an open rectangular or square ring in the middle.

Hot Galvanized Wood Screws are wood screws with a hot-dip galvanized surface, mainly used for wood connections in outdoor or humid environments.

When the square nut block is installed, it needs to be pre-plugged into the aluminum profile groove pit. It is used to connect various accessories on the profile and place them at any assembly point

A stud has no head and is threaded at both ends, with no thread in the middle and a bare rod in the middle. Generally need to go through the surface treatment, bolt surface treatment of many types,

Hot-dip galvanized anchor bolts are anchor bolts that have been coated with zinc, a treatment that provides additional corrosion resistance, especially in wet environments.

Metal locknut is a nut that can self-lock by friction. In order to prevent this phenomenon, self-locking nuts were invented because of vibration and other reasons that the ordinary nuts would loosen

High strength hexagon nut shape, connection structure and ordinary bolts are basically the same, the main difference between the two is: ordinary bolt connection depends on the rod body bearing